Lighting Installation Services in Melbourne, VIC
0478 790 051
Melbourne House Rewiring
Are you tired of having your ceiling lights constantly flicker or take a few seconds to turn on? These are the signs to start getting your lighting upgraded, repaired, or replaced. At Melbourne House Rewiring, we provide high-quality lighting design and installation services throughout Melbourne, VIC and its suburbs for homes and businesses that are looking for a tailored lighting plan to enhance the ambience and functionality of their space. Our team specialises in complete lighting designs for new builds and renovations, as well as older properties that are looking to reset and upgrade their environment. We provide LED lighting upgrades, decorative lighting, indoor and outdoor installations, downlights, feature lighting, and commercial or retail lights.
If you're personally dealing with darker rooms or just need expert guidance in a new build so you don't install too many lighting units or underestimate how much you'd need, then our services are perfect for you. We understand choosing the right lighting can be overwhelming, especially if you don't have a lot of experience with it. That's why our lighting team start off with an initial consultation to understand your preferences, then take your through the lighting design and planning phase, before finally installing them into your building. Working with us means we install lights properly so that it is compatible with your circuits, and we check that they fit directly into your electrical system without issues. There's no need to get an additional electrician to double-check this because we've got it covered, from the wiring and the installation to the design and planning of your space. You can trust that we'll meet the style and safety standards of your space.
Why Professional Lighting Design Matters
Professional lighting design greatly affects the vibe, look and even functionality of your space. In every room or build, there will be a vision for the space, whether it's to welcome guests or create a comfortable feel for your family or staff. Lighting contributes to this. Fewer lights mean that rooms end up dark and hard to navigate, whilst poorly positioned lights can create shadows where you need more brightness, and brightness in areas that don't need it. Our electrical contractors in Melbourne, VIC discuss the function and ambience of each space with you before providing a customised lighting design tailored to your needs. You end up with a room that has adequate brightness for its purpose, offers customisable, adjustable brightness to allow for bright lights as well as ambient feels, and selects the right lighting fixtures that meet the look you'd like for your space.v You'll be guided through all of this by our lighting experts.
Indoor Lighting Installations
Indoor lights are important in setting the ambience and feel in every room. They serve different purposes within a home or business. The ceiling lights we install provide an ambient illumination in your rooms. Downlights create clean and modern looks that direct light downwards. Pendant lights would hang decoratively over dining tables and kitchen islands. Wall lights can add depth and accent in hallways. Whatever lighting you choose, our electrical contractors install all types of lighting indoors, and position them optimally for you so that the vision you have for your space will be met and enhanced to create beautiful functional spaces for your home or workspace.
Outdoor Lighting Installations
Outdoor lighting generally serves one of multiple of the following purposes: security, safety, entertainment, or aesthetics. Security lights would fit and illuminate entryways, driveways, and property perimeters. Safety lights are perfect for pathway and gardens to prevent falls in your backyard or on walkways or steps. Lighting in entertainment areas make outdoor spots usable in the evening or night time. Aesthetic lighting tend to be more expensive, and are used to give your outdoor atmosphere a beautiful and stylish look, like tree uplighting or twinkling festoons lights strung together. Whatever the case, our lighting installers will install the right fixtures for you and ensure they fit into your electrical system, so that they can work for you over a long time.
Types of Lighting We Install
At Melbourne House Rewiring, we provide a range of lighting options to fit your style and preferences that you can choose from. This depends on your space and the functionality or feel you're looking to add. Here are some of the common lighting solutions customers go with:
Recessed Downlights
Feature Lights
Kitchen Lighting
Bathroom Lighting
Retail Store Lighting
Landscape and Garden Lighting
Office Lighting
Warehouse and Industrial Lighting
Emergency and Exit Lighting
Dimmer/Smart Lighting
Pool and Water Feature Lighting
Motion Sensor Lights
Getting the right lighting for your space requires an intuition to design that no ordinary electrician has. Our lighting experts however have done lighting planning and design for many of our past customers, and with that brings experience of knowing which fixtures fit your space, depending on what you want to achieve for the space. Contact us today if you'd like to discuss your lighting needs.
Our Lighting Installation Process
Getting new lights installed is more than just replacing a fitting that used to be there. Proper planning ensures that each room has the right amount of light and the switches and fixture in your space are fitted where they are most useful. Our electricians follow a clear process so that your lighting works properly and suits the space it is used in. Here is how our lighting installation process generally goes:
1. Lighting consultation
We start off with an initial discussion to see how your space is used, then inspect your area for dark or poorly lit areas. We show this to you during the site visit.
2. Planning and layout
After planning where the lights would go, and how many switches, lighting units, and wiring we'd need. We give you a quote to accept.
3. Installation and wiring
Once accepted, the job starts where our team runs new cables where they need to be in your building, mount the fixtures correctly, and install your lights.
4. Testing and adjustments
You're now left with a new set of installed lights fit for your space's purposes. We now test the system to make sure your lights function as they should and walk this through with you.
Light replacements can take anywhere from an hours to a few hours, though larger lighting upgrades throughout your home can take longer. Our qualified lighting technicians know what they are doing and have planned and installed lighting that has worked and served our past customers well. Contact us today if you'd like to get started installing solid illumination that is fit for your space.
FAQs
How often should I have my home's electrical system inspected?
We recommend scheduling a professional electrical inspection at least every five years for residential properties. However, if you notice any unusual electrical behavior, such as flickering lights or tripped circuits, it's essential to have an inspection sooner. Regular inspections help identify potential issues before they become major problems, ensuring the safety and efficiency of your electrical system.
How do I know if I need a full house rewire or just a switchboard upgrade?
Generally, a switchboard upgrade is often necessary if you are adding high-power appliances or if your current board is outdated (e.g., still using ceramic fuses). However, if your home has older rubber or cotton-insulated wiring, a full house rewire is the only way to ensure the entire system can safely handle modern electrical loads. Regardless, know that we always provide a thorough safety inspection to determine which solution is right for your property, so you don't have to worry about making the wrong choice. Give us a call, and we can recommend the right solution forward.
How long does a typical house rewiring project take?
For a standard three-bedroom home, a full rewire generally takes between 3 to 7 days, depending on the accessibility of the wiring and the complexity of the layout. We aim to minimise disruption and will provide a specific timeline after our initial on-site assessment.
Can I add extra power points and new lighting while my house is being rewired?
Absolutely. In fact, a rewiring project is the most cost-effective time to upgrade your home’s functionality. Since we are already accessing the wall cavities and ceiling space, adding modern LED lighting or extra power points in more convenient locations is much simpler and more affordable than doing it as a standalone job by itself. With our service, you can opt for additional power points or lighting upgrades with the house rewire, or get it as its own service by itself.
Will there be a lot of damage to my walls during the rewiring process?
Our experienced electricians use specialised tools and techniques to "fish" wires through existing wall cavities and ceiling spaces whenever possible. This minimises the need for cutting into plaster. If access is restricted and a small opening is required, we will discuss this with you beforehand to ensure you are comfortable with the plan.
Servicing Melbourne, VIC
including Sorrento, Frankston, Lilydale, Cragieburn, Werribee, and Melbourne CBD.
Contact Info
Address: Level 4/179 Swanston Street Melbourne VIC 3000, Melbourne VIC 3000
Phone: 0478 790 051
Email: [email protected]
Service Hours: Monday to Friday 7:00AM to 5:00PM